features glass passivated chip junction high case dielectric strength high surge current capability ldeal for printed circuit board machanical dat a terminal:plated leads solderable per mil-std 202e, method 208c case:ul-94 class v-0 recognized flane retardant epoxy polarity:polarity symbol marked on body mounting position:any maximum ratings and electrical characteristics characteristics symbol d3kb05 d3kb1 d3kb2 d3kb4 d3kb6 d3kb8 d3kb10 unit maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward rectified output current @ t c =140 (with heatsink) @ ta=29 (without heatsink) peak forward surge current 8.3ms single half sine-wave super imposed on rated load (jedec method) maximum forward voltage at 1.5a dc v f v i 2 t rating for fusing (t<8.3ms) i 2 t a 2 s typical thermal resistance without heatsink r ja with heatsink (note2) r jc without heatsink r jl maximum dc reverse current @ t j =25 at rated dc blocking voltage @ t j =125 operating temperature range t j storage temperature range t stg notes:1.the typical data above is for reference only( ?). 2.device mounted on 50mm*50mm*1.6mm cu plate heatsink. rev. 8, 16-mar-2017 dimensions in inches and (milimeters) rating at 25 ambient temperature unless otherwise specified. d3kb05 thru d3kb10 glass passivated reverse voltage - 50 to 1000 volts forward current - 3.0 amperes bridge rectifiers single phase, half wave ,60hz, resistive or inductive load. for capacitive load, derate current by 20% i (av) a 3 1.2 33.6 37 /w 1.5 5.5 i fsm 90 a 1.05 -55 to +150 -55 to +150 i r 5 a 500 d3k r2 ~ ~ - + 4 3 2 1 4 3 2 1 .531(13.5) .555(14.1) .461(11.7) .484(12.3) .437(11.1) .413(10.5) .055(1.4) .047(1.2) .484(12.3) .461(11.7) .276(7.0) .252(6.4) .059(1.5) .043(1.1) .049(1.25) .041(1.05) .034(0.86) .026(0.66) .162 .138 (3.51) (4.11)(4.11) (3.51) .138 .162 (4.11) (3.51) .138 .162 .057(1.45) .110(2.8) .094(2.4) .130(3.3) .114(2.9) .055(1.4) .039(1.0) .024 (0.6) .094(2.4) .071(1.8) .024(0.6) .016(0.4) .134 .122 (3.1) (3.4)
rating and charactertic curves d3kb05 thru d3kb10 the curve graph is for reference only, can't be the basis for judgment( ?)! rev. 8, 16-mar-2017 number of cyclets at 60hz peak forward surge current, amperes fig.2-maximum non-repetitive surge current 0 10 100 80 90 1 20 40 60 2 50 20 5 pulse width 8.3ms single half-sine-wave (jedec method) single phase half wave 60hz resistive or inductive load fig.1-derating curve output rectified current case temperature, c average forward current amperes 60 120 140 0.0 0.5 3.0 100 80 40 20 0 1.5 2.0 1.0 2.5 150 fig.1-derating curve output rectified current with heatsink without heatsink instantaneous reverse current,(a) percent of rated peak reverse voltage (%) fig.4-typical reverse characteristics 0.01 0.1 0 20 40 60 80 100 1.0 10 100 t j =75c t j =25c t j =100c t j =125c 0.01 0.1 1.0 10 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 instantaneous forward voltage,volts instantaneous forward current,(a) fig.4-typical forward characteristics t j= 25c pulse width:300us 2% duty cycle t j =25c t j =75c t j =125c t j =100c
legal disclaimer notice all specifications and data are subject to be changed without notice to improve reliability function or design or other reasons. hy makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the co- tinuing production of any product. to the maximum extent permitted by applicable law, hy disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,consequential or incidental d- amages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merch- antability. statements regarding the suitability of products for certain types of applications are based on hy?s knowledge of typical require- ments that are often placed on hy products in generic applications. such statements are not binding statements about the suitabi- lity of products for a particular application. it is the customer?s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application.parameters provided in datasheets and specific- ations may vary in different applications and performance may vary over time. all operating parameters, including typical paramet- ers, must be validated for each customer application by the customer?s technical experts. product specifications do not expand or otherwise modify hy?s terms and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, hy products are not designed for use in medical, life-saving, or life-sustaining applicati- ons or for any other applications in which the failure of the hy product could result in personal injury or death. customers using or selling hy products not expressly indicated for use in such applications do so at their own risk.please contact authorized hy pers- onnel to obtain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of hy. product names and markings noted herein may be trademarks of their respective owners. ?????????? hy ???????????hy (i) ? ??????(ii) ???????(iii) ??? ???????? ????? hy ? hy ???????????? ???????????????? ????? ????????????? ??? hy ???? hy ???? ?hy ????? hy ??????? ?????? hy ????????hy ?? ? ? hy ??????????????????? ??? rev. 2, 16-mar-2017 disclaimer
|
